Titan Commands Quick Reference
Please note that some commands may require Enter to complete the command. In this reference Enter has always been omitted for clarity.
Softkey formatting means a softkey on the console. Button formatting means a physical labelled button{ } means a handle button, e.g. {Cue} means the blue button on a cue playback handle
Numbers are typed on the numeric keypad
The available buttons may differ depending on which console you are using. If your console doesn't have the button, a softkey is also provided with the same function.
Some of the buttons in this guide have changed names and so here is a list of the old button names and their new equivalents.
Old Name | New Name |
---|---|
Connect | Cue |
SET | TIME |
Fixtures
Fixture 1 Through 10
Select fixtures 1 through to 10.
Fixture 1 Through 10 And 20 And 25
Select fixtures 1 to 10 and 20, 25
Fixture 1 Through 10 And .2
Select the second cell of fixtures 1 to 10.
Fixture 1 Through 10 And .2
Select the second cell of fixtures 1 to 10.
Fixture 5 @ @
Put fixture 5 at full intensity.
Fixture 1 Through 60 @ 75
Put fixtures 10 to 60 at 75% intensity.
Group 2 @ @
Put group 2 at full intensity.
Group 2 @ 75
Put group 2 at full intensity.
Celled Fixtures (Sub Fixtures)
. m
Select cell m in the selected fixtures.
.
Select all the cells in the selected fixtures.
n .
all sub-fixtures of fixture n
1 Through 5 . 2
Select the second cell of fixtures 1 to 5
. Through . j
Through . j
Select cells 1 to j of all selected fixtures
. m ThroughCells m->last of all selected fixtures
. m Through .j
. m Through i
sub-fixtures m->j or all selected fixtures
n Through i.
all sub-fixtures of fixtures n->i
n Through i.j
sub-fixture j of fixtures n->i
n Through .j
sub-fixture 1->j of fixture n
n . Through
all sub-fixtures of fixture n->last consecutive of type n
n . Through i
sub-fixtures 1->i of fixture n
n . Through i.j
sub-fixtures 1->j of fixtures n->i
Select If
Select If @@
Select all fixtures above 0% intensity.
Select If @ Through 50
Select all fixtures above 50% intensity
Select If @ 50 Through
Select all fixtures below 50% intensity
Record
{Cue} {Cue}
Merge the live cue with the programmer.
{Cue} 90.1
Merge cue 90.1 with the programmer.
And 20
{Cue} 1 {Through} 10Merge programmer contents into cues 1 to 10 and 20.
Position {Cue} {Cue}
Merge all but position from the programmer with the live cue.
Options Position {Cue} {Cue}
Merge only position from the programmer with the live cue.
Copy, Move in cue list
Copy {Cue} n Enter
Copy cue n and append at the end of the cue list.
Copy/Move {Cue} 1 Through 10 NOT 5 And 20 @ n
**Copy/Move {Cue} 1 Through 10 NOT 5 And 20
Enter n Enter**Copy or move cues 1,2,3,4,6,7,8,9,10,20 and insert after cue n.
**Copy/Move {Cue} 1 Through 10 NOT 5 And 20 @
@****Copy/Move {Cue} 1 Through 10 NOT 5 And 20
Enter Enter**Copy or move cues 1,2,3,4,6,7,8,9,10,20 and insert at the end of the cue list.
Copy/Move {Cue} 1 Through 10 NOT 5 And 20 @{target playback} n
**Copy/Move {Cue} 1 Through 10 NOT 5 And 20
Enter {target playback} n Enter**Copy or move cues 1,2,3,4,6,7,8,9,10,20 and insert at cue n in the target playback.
Delete
Delete {Cue} n
Delete cue n from the connected cue list.
Include
Include {Cue} n
Include cue n into the programmer from the connected cue list.
Times
Time 5
5 sec fade in
Cue 3 Time 5
5 sec fade in on connected playback\'s cue 3
Time Fixture 5
5 sec fade in for all attributes of selected fixtures
Time Fixture Gobo 5
5 sec fade in for gobo attribute group of selected fixtures
Time Fixture @ B@ 5
5 sec fade in for attribute connected to wheel B on selected fixtures
Time 5 @ 3
5 sec fade in, 3 sec delay
Time 5 And 2
5 sec fade in, 2 sec fade out
Time 1 Through 10
times spread across fixtures according to selection order
Cue Lists
Cue n Go
Go to cue n (in connected cue list)
5 Go
Run the next cue with 5 sec fade instead of the programmed cue time
Cue 3 Enter 5 Go
Jump to cue 3 with 5 sec fade instead of the programmed cue time