Network Ports used by Titan
Titan uses the following ports over the network. If your network includes firewalls you might need to know these so you can set up rules for them.
| Application | Port | Address | Notes |
|---|---|---|---|
| All (pre v19 only) | TCP 808 | All available adapters | Titan Remote, TNPs, multi-user and backup. |
| TitanNet (pre v19 only) | TCP 50052 | All available adapters | Synergy, TitanNet |
| Synergy | TCP 50051 | All available adapters | Synergy, TitanNet, Titan Media Node, Prism |
| TitanNet* | TCP 4442 | All available adapters | Connections from console engine |
| Console Engine* | TCP 4440 | All available adapters | Connections from UI, Titan Remote, multi-user and backup. |
| TitanNet Processor Engine | TCP 4441 | All available adapters | Connections from UI and console engine |
| CITP Active Fixture Service* | TCP 4444 | All available adapters | Connections from UI and console engine |
| CITP | UDP 4809/TCP | Multicast 224.0.0.180 | Used for communication with Capture Visualiser and media servers. Discovery done by multicast UDP then negotiates TCP connection |
| WebAPI | TCP 4430 | All available adapters | WebApi |
| SLP | UDP 427 | Multicast 239.255.255.253 | Used to discover TitanNet devices on the network. |
| Ping | ICMP echo | Any adapters that are in use | Monitors connection to TitanNet devices. |
| Art-Net | UDP 6454 | By default all wired adapters | |
| sACN | UDP 5568 | Multicast 239.255.0.0-239.255.249.255 | |
| RDMNet | UDP 5569 | ||
| ProDJ Tap | UDP 60000-60002, 65023-65535 | Protocol for getting data from Pioneer DJ equipment by software now known as TC-Supply | |
| LiveDMX | UDP 5584 | Multicast 239.184.0.0-239.184.249.255 | Used for internal Visualiser DMX data |
| NTP | UDP 1234 | Between TitanNet hosts | Non-standard NTP port |
* New port for v19 and above. Otherwise applies to all versions.